TechSoft UK Ltd
 
 
 
<< Back
(All prices shown are in pounds sterling and exclude VAT)
  RotoCAMM TS-400E / MODELA PRO MDX-500E / MDX-650E TOOLS
 
 
 
1111 MDX500E MDX650E
TS-400E
MDX-500E
MDX-650E
 

COLLETS
These models are supplied with both TechSoft 6mm and 1/4 inch collets. The collets allow the use of standard 6mm shank engineering tools and 1/4 inch woodworking router cutters.

Another option is to use a tool adaptor (TA-ADAPT-M3 or TA-ADAPT-M4) in conjunction with any of the 3.17mm, or 4.36mm shank tooling available for either the RotoCAMM MDX-40E or the MODELA MDX-15E/20E. The adaptor/tool assembly can then be held in a 6mm collet. This allows the use of a wide range of tooling for activities as diverse as deep 3D machining and PCB engraving and drilling. A locating ring attachment allows 6mm tools to be removed and reset into the machine without re-datuming (for 3.17mm and 4.36mm tools the adaptors serve the same purpose).
 
TC-MDX500-COLLETM
Fixed collet for 6mm dia. tools
25.00
TC-MDX500-COLLETI
Fixed collet for 1/4 inch dia. tools
25.00
TC-MDX500-COLLETN
Collet nut
13.00
 
TA-M6-LOCRING
Locating Ring to fit 6mm tools (pk 3)
22.00
TA-ADAPT-M3
Adaptors for 3.17mm tools (pk 3)
22.00
TA-ADAPT-M4
Adaptors for 4.36mm tools (pk 3)
22.00
TA-HEXTOOL20
Tool for locating ring/adaptor adjustment
3.50
 
TOOLS
6mm shank diameter tooling is widely available from all general engineering suppliers. However, TechSoft also stock a variety of “harder to source” specialist carbide tools as detailed below. These tools do not necessarily have 6mm shanks, and may require a different collet (see above).
 
ENGRAVING TOOL (40 deg)
General purpose solid carbide vee point engraving tool, ground to an included angle of 40 deg.  Suitable for engraving most materials. 
 
TA-EC6-40 6mm x 75mm (Double ended)
 25.00
 

VCARVING TOOL (90 deg)

engr9011.gif (1653 bytes)

Solid carbide vee point slot drill with an included angle of 90 degrees. This tool is ideal for VCarving, PhotoVCarving and cutting 45 degree chamfers.

TA-VC6-90 6mm x 50mm
29.00
 

LONG REACH MODELLING SLOT DRILLS

A range of long reach carbide slot drills, ideal for deep 3D machining.
 
TA-SDE-3 3mm dia 25mm cut 3mm x 75mm
*20.00
TA-SDE-4 4mm dia 25mm cut 4mm x 75mm
*23.00
TA-SDE-5 5mm dia 25mm cut 5mm x 75mm
*25.00
TA-SDE-6 6mm dia 25mm cut 6mm x 75mm
25.00
 

EXTENDED LONG REACH MODELLING SLOT DRILLS

A range of long reach carbide slot drills, ideal for deep 3D machining.
 
TA-SD6LR-2 2mm dia 10mm cut 6mm x 110mm   
25.00
TA-SD6LR-3 3mm dia 25mm cut 6mm x 110mm
27.00
TA-SD6LR-4 4mm dia 25mm cut 6mm x 110mm
29.00
 

LONG REACH BALL NOSED MODELLING CUTTERS

A range of long reach carbide slot drills, ideal for deep 3D machining.
 
TA-BNE-3 3mm dia 25mm cut 3mm x 75mm   
*20.00
TA-BNE-4 4mm dia 25mm cut 4mm x 75mm   
*23.00
TA-BNE-5 5mm dia 25mm cut 5mm x 75mm   
*28.00
TA-BNE-6 6mm dia 25mm cut 6mm x 75mm  
28.00
 

EXTENDED LONG REACH BALL NOSED MODELLING CUTTERS

A range of long reach carbide slot drills mounted in an extended 6mm shank for better access.
 
TA-BN6LR-2 2mm dia 10mm cut 6mm x 110mm   
23.00
TA-BN6LR-3 3mm dia 25mm cut 6mm x 110mm
27.00
TA-BN6LR-4 4mm dia 25mm cut 6mm x 110mm
29.00
 

HIGH HOOK SLOT DRILLS

A range of carbide slot drills with tooth forms specially designed for rapid CNC machining in aluminium and plastics.
 
TA-SDEA-2 2mm dia 6mm cut 3mm x 38mm
*15.00
TA-SDEA-3 3mm dia 12mm cut 3mm x 38mm
*15.00
TA-SDEA-4 4mm dia 14mm cut 4mm x 50mm
*21.00
TA-SDEA-5 5mm dia 20mm cut 5mm x 50mm
*28.00
TA-SDEA-6 6mm dia 20mm cut 6mm x 63mm
29.00
 

* The shank diameter of these tools is the same as the cutter diameter. Cutters with a shank other than 6mm will require a simple collar adaptor which may be made as follows: Cut a 6mm rod to a length of 20-25 mm. In a lathe, drill a suitable diameter hole through the length of the rod. Glue the collar onto the tool with epoxy resin adhesive (eg., Araldite).


(N.B. All tool lengths are nominal.)