TechSoft UK Ltd
 
 
 
<< Back
(All prices shown are in pounds sterling and exclude VAT)
  MODELA PRO II MDX-540E
 
 
MDX540

COLLETS
This machine is supplied with a 6-7mm collet as standard. However, for most general operations TechSoft recommend the use of 4.36mm (11/64 inch) extended shank tools. These are simply inserted into the machine spindle using a TechSoft tool adapter. Tools can then be lowered onto the work surface, thus datuming the tool automatically. A locating ring can remain on the tool to allow them to be easily removed and replaced without the need for re-datuming. A 4.36mm adaptor and two locating rings are supplied by TechSoft with the machine.

Alternatively the 6-7mm collet allows the use of standard 6mm shank engineering tools and 1/4 inch woodworking router cutters. Additional collets (TA-COLLET-D34 and TA-COLLET-D45) allow the use of any of the Long Reach or High Hook tools listed below. This wide range of tooling allows activities as diverse as deep 3D machining and PCB engraving and drilling.
 
TA-COLLET-D67
6-7mm collet (replacement)
12.00
TA-COLLET-D56
5-6mm collet
12.00
TA-COLLET-D45
4-5mm collet
12.00
TA-COLLET-D34
3-4mm collet
12.00
TA-COLLET-D23
2-3mm collet
12.00
 
TA-ADAPT1-M4
Adaptor for 4.36mm tools (replacement)
9.50
TA-M4-LOCRING
Locating Ring to fit 4.36mm tools (pk 3)
22.00
TA-M6-LOCRING
Locating Ring to fit 6mm tools (pk 3)
22.00
TA-HEXTOOL20
Tool for locating ring/adaptor adjustment
3.50
 
TOOL PACKS
Mixed Tool Pack - 540E
General set of tools (Save £5)
(TA-M4-LOCRING, TA-ECT4MP-40, TA-SD4MP-2, TA-SD4MP-4, TA-BN4MP-2)
 120.00
3D Tool Pack - 540E
Specialist 3D tools (Save £7)
(TA-SD6LR-2, TA-SD6LR-4, TA-BN6LR-2, TA-BN6LR-4)
99.00
PCB Tool Pack - 540E
Specialst PCB tools (Save £5)
(TA-M4-LOCRING, TA-ECT4MP-40, TA-SD4MP-2, TA-PD4MP-0.8, TA-PD4MP-1)
81.00
 
ENGRAVING TOOL (40 deg)
engr4011.gif (1730 bytes)
General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.
 
TA-ECT4MP-40 4.36mm x 160mm
 19.00
TA-ECT-REPLACE Replace re-sharpened TA-ECT4MP-40
(N.B Tool must be returned to TechSoft)
5.00
 

VCARVING TOOL (90 deg)

engr9011.gif (1653 bytes)

Solid carbide vee point slot drill with an included angle of 90 degrees. This tool is ideal for VCarving, PhotoVCarving and cutting 45 degree chamfers.

TA-VC6-90 6mm x 50mm
29.00
 
SLOT DRILLS
sltdrl11.gif (2082 bytes)
General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic, and non-ferrous metals such as aluminium.
 
TA-SD4MP-0.5 0.5mm dia 4.36mm x 65mm
25.00
TA-SD4MP-0.8 0.8mm dia 4.36mm x 65mm
21.00
TA-SD4MP-1 1mm dia 4.36mm x 65mm
19.00
TA-SD4MP-1.5 1.5mm dia 4.36mm x 65mm
19.00
TA-SD4MP-2 2mm dia 4.36mm x 65mm
19.00
TA-SD4MP-2.5 2.5mm dia 4.36mm x 65mm
19.00
TA-SD4MP-3 3mm dia 4.36mm x 65mm
19.00
TA-SD4MP-4 4mm dia 4.36mm x 65mm
42.00
 
BALL NOSED CUTTERS
bllnos11.gif (2041 bytes)
General purpose round ended cutters in carbide.  They are ideal for 3D modelling, particularly in modelling wax or foam.
 
TA-BN4MP-2 2mm dia 4.36mm x 65mm
23.00
TA-BN4MP-3 3mm dia 4.36mm x 65mm
 24.00
TA-BN4MP-4 4mm dia 4.36mm x 65mm 
 42.00
 
PRINTED CIRCUIT BOARD DRILLS
PCB Circuit Board Drills
A range of specialist PCB drills in tungsten carbide.
 
TA-PD4MP-0.8 0.8mm dia 4.36mm x 65mm
13.00
TA-PD4MP-1 1.0mm dia 4.36mm x 65mm
13.00
TA-PD4MP-1.2 1.2mm dia 4.36mm x 65mm
13.00
TA-PD4MP-1.5 1.5mm dia 4.36mm x 65mm
13.00
 
LONG REACH MODELLING SLOT DRILLS


A range of long reach carbide slot drills, ideal for deep 3D machining.
 
TA-SDE-3 3mm dia 25mm cut 3mm x 75mm
*20.00
TA-SDE-4 4mm dia 25mm cut 4mm x 75mm
*23.00
TA-SDE-5 5mm dia 25mm cut 5mm x 75mm
*25.00
TA-SDE-6 6mm dia 25mm cut 6mm x 75mm
25.00
 
* These tools require collet TA-COLLET-D34, TA-COLLET-D45 or TA-COLLET-D56 as appropriate.
 

EXTENDED LONG REACH MODELLING SLOT DRILLS

A range of long reach carbide slot drills mounted in an extended 6mm shank for ease of use.
 
TA-SD6LR-2 2mm dia 10mm cut 6mm x 110mm   
25.00
TA-SD6LR-3 3mm dia 25mm cut 6mm x 110mm
27.00
TA-SD6LR-4 4mm dia 25mm cut 6mm x 110mm
29.00
 
LONG REACH BALL NOSED MODELLING CUTTERS



A range of long reach carbide slot drills, ideal for deep 3D machining.
 
TA-BNE-3 3mm dia 25mm cut 3mm x 75mm   
*20.00
TA-BNE-4 4mm dia 25mm cut 4mm x 75mm   
*23.00
TA-BNE-5 5mm dia 25mm cut 5mm x 75mm   
*28.00
TA-BNE-6 6mm dia 25mm cut 6mm x 75mm  
28.00
* These tools require collet TA-COLLET-D34, TA-COLLET-D45 or TA-COLLET-D56 as appropriate.
 

EXTENDED LONG REACH BALL NOSED MODELLING CUTTERS

A range of long reach carbide slot drills mounted in an extended 6mm shank for ease of use.
 
TA-BN6LR-2 2mm dia 10mm cut 6mm x 110mm   
23.00
TA-BN6LR-3 3mm dia 25mm cut 6mm x 110mm
27.00
TA-BN6LR-4 4mm dia 25mm cut 6mm x 110mm
29.00
 

HIGH HOOK SLOT DRILLS

A range of carbide slot drills with tooth forms specially designed for rapid CNC machining in aluminium and plastics.
 
TA-SDEA-2 2mm dia 6mm cut 3mm x 38mm
*15.00
TA-SDEA-3 3mm dia 12mm cut 3mm x 38mm
*15.00
TA-SDEA-4 4mm dia 14mm cut 4mm x 50mm
*21.00
TA-SDEA-5 5mm dia 20mm cut 5mm x 50mm
*28.00
TA-SDEA-6 6mm dia 20mm cut 6mm x 63mm
29.00
 

* These tools require collet TA-COLLET-D34, TA-COLLET-D45 or TA-COLLET-D56 as appropriate.

(N.B. All tool lengths are nominal.)