TechSoft UK Ltd
 
 
 
<< Back
(All prices shown are in pounds sterling and exclude VAT)
 
  MODELA MDX-15/E & MDX-20/E TOOLS
 
 

COLLETS
MODELAs have a 6mm dia spindle. However, for most general operations TechSoft recommend the use of 4.36mm (11/64 inch) extended shank tools. These are simply inserted into the machine spindle using a TechSoft tool adapter. Tools can then be lowered onto the work surface, thus datuming the tool automatically. Adaptors can remain on the tool to allow them to be easily removed and replaced without the need for re-datuming. Two 4.36mm adaptors are supplied by TechSoft with the machine. Extra adaptors are available as follows:

TA-ADAPT-M3 Adaptors for 3.17mm tools (pk of 3)           
22.00
TA-ADAPT-M4 Adaptors for 4.36mm tools (pk of 3)
22.00
TA-HEXTOOL15 1.5mm Hex Tool for spindle grub screws
3.50
TA-HEXTOOL20 2mm Hex Tool for collet adjustment
3.50
 
TOOL PACKS
Mixed Tool Pack - 15/20E
 General set of tools (Save £5)    
(TA-ADAPT-M4, TA-ECT4M-40, TA-SD4M-2, TA-SD4M-4, TA-BN4M-2)       
120.00
PCB Tool Pack - 15/20E
 Specialist PCB tools (Save £5)
(TA-ADAPT-M3, TA-ADAPT-M4, TA-ECT4M-40, TA-SD4M-2, TA-PD3M-0.8, TA-PD3M-1)
103.00
 

ENGRAVING TOOL (40 deg)

engr4011.gif (1730 bytes)

General purpose carbide tipped vee point engraving tools, ground to an included angle of 40 deg. Suitable for engraving most materials, and recommended as a standard tool for all users.

TA-ECT4M-40 4.36mm x 90mm
19.00
TA-ECT-REPLACE Replacement re-sharpened TA-ECT4M-40
(N.B. Tool must be returned to TechSoft)
5.00

Buy
 

SLOT DRILLS

sltdrl11.gif (2082 bytes)

General purpose milling/drilling slot drills in solid carbide. These tools (particularly in sizes 2mm and above) are specially designed to produce a good surface finish on plastic materials such as styrene and acrylic.

TA-SD4M-0.5 0.5mm dia 4.36mm x 90mm 
25.00
TA-SD4M-0.8 0.8mm dia 4.36mm x 90mm   
21.00
TA-SD4M-1 1mm dia 4.36mm x 90mm   
19.00
TA-SD4M-1.5 1.5mm dia 4.36mm x 90mm   
19.00
TA-SD4M-2 2mm dia 4.36mm x 90mm   
19.00
TA-SD4M-2.5 2.5mm dia 4.36mm x 90mm  
19.00
TA-SD4M-3 3mm dia 4.36mm x 90mm  
19.00
TA-SD4M-4 4mm dia 4.36mm x 90mm  
42.00
 

BALL NOSED CUTTERS

bllnos11.gif (2041 bytes)

General purpose round ended cutters in carbide. They are ideal for 3D modelling, particularly in modelling wax or foam.

TA-BN4M-2 2mm dia 4.36mm x 90mm  
23.00
TA-BN4M-3 3mm dia 4.36mm x 90mm    
24.00
TA-BN4M-4 4mm dia 4.36mm x 90mm      
42.00
 

PRINTED CIRCUIT BOARD DRILLS

TA-PD3M

A range of solid carbide PCB drills. These must be used in conjunction with the 3.17mm tool adaptor (TA-ADAPT-M3, see above).

TA-PD3M-0.8 0.8mm dia (pk 5) 3.17mm x 40mm  
13.00
TA-PD3M-1 1.0mm dia (pk 5) 3.17mm x 40mm    
13.00
TA-PD3M-1.2 1.2mm dia (pk 5) 3.17mm x 40mm      
13.00
TA-PD3M-1.5 1.5mm dia (pk 5) 3.17mm x 40mm        
13.00
 
(N.B. All tool lengths are nominal.)